
TH101: Single Hanger Clamp
[Code: IPC0400118]
This stamped cold rolled steel hanger clamp is coated with nylon. To mount, bolts are to be 1/4” with a mounting hole of 5/16”. Either a back bolt or a cross bolt can be used. Hangers may be ganged as TH201, TH301, TH402 and are required for every 5' (1.52m) of conductor. *Note: Joints should be located no more than 3" (76.2mm) from hangers to avoid flexing. Looking for a replacement part? Navigate here for all Series T products! |